Autocoder

Mensuration aptitude questions with solutions

Last updated 2026-11-19

Mensuration is the measurement of lengths, areas and volumes of plane and solid shapes. The chapter is mostly formula recall plus careful unit handling, with a few recasting problems where one solid is melted into another.

The page lists the formulas, and 14 problems with full working. Use pi = 22/7 where the radius is a multiple of 7. For related drills see percentages for the change-in-area questions. The overall plan is in how to crack an aptitude test.

Key formulas for mensuration

Shortcuts and common mistakes

Mensuration aptitude questions with solutions: questions with worked answers

  1. 1

    Find the area and perimeter of a rectangle 12 m by 8 m.

    easy

    Area = 12 × 8 = 96 m². Perimeter = 2(12 + 8) = 40 m. Final answer: 96 m² and 40 m.

  2. 2

    Find the area and circumference of a circle of radius 7 cm (use pi = 22/7).

    easy

    Area = 22/7 × 49 = 154 cm². Circumference = 2 × 22/7 × 7 = 44 cm. Final answer: 154 cm² and 44 cm.

  3. 3

    Find the volume and total surface area of a cuboid 5 cm by 4 cm by 3 cm.

    easy

    Volume = 5 × 4 × 3 = 60 cm³. Surface area = 2(20 + 12 + 15) = 94 cm². Final answer: 60 cm³ and 94 cm².

  4. 4

    Find the area of a triangle with sides 13, 14 and 15 cm.

    easy

    s = 21. Area = sqrt(21 × 8 × 7 × 6) = sqrt(7,056) = 84. Final answer: 84 cm².

  5. 5

    A cylinder has radius 7 cm and height 10 cm. Find its volume and curved surface area.

    medium

    Volume = 22/7 × 49 × 10 = 1,540 cm³. Curved surface = 2 × 22/7 × 7 × 10 = 440 cm². Final answer: 1,540 cm³ and 440 cm².

  6. 6

    Find the volume of a sphere of radius 21 cm.

    medium

    Volume = (4/3) × 22/7 × 21³ = (4/3) × 22/7 × 9,261 = 38,808. Final answer: 38,808 cm³.

  7. 7

    A cone has base radius 7 cm and height 24 cm. Find its slant height, curved surface area and volume.

    medium

    Slant height = sqrt(49 + 576) = 25. Curved surface = 22/7 × 7 × 25 = 550 cm². Volume = (1/3) × 22/7 × 49 × 24 = 1,232 cm³. Final answer: 25 cm, 550 cm² and 1,232 cm³.

  8. 8

    Find the surface area and space diagonal of a cube of side 6 cm.

    medium

    Surface area = 6 × 36 = 216 cm². Diagonal = 6 sqrt(3) = about 10.39 cm. Final answer: 216 cm² and 6 sqrt(3) cm.

  9. 9

    A rectangular plot is 40 m by 30 m. A path 2 m wide runs inside along all four sides. Find the area of the path.

    medium

    Inner rectangle = 36 × 26 = 936 m². Plot = 1,200 m². Path = 1,200 - 936 = 264. Final answer: 264 m².

  10. 10

    The radii of two spheres are in the ratio 2 : 3. Find the ratio of their volumes and surface areas.

    hard

    Volumes are in the ratio of cubes: 8 : 27. Surface areas are in the ratio of squares: 4 : 9. Final answer: 8 : 27 and 4 : 9.

  11. 11

    A solid metal sphere of radius 3 cm is melted and cast into a cylinder of radius 1 cm. Find the height of the cylinder.

    hard

    Sphere volume = (4/3) pi × 27 = 36 pi. Cylinder volume = pi × 1 × h. So h = 36. Final answer: 36 cm.

  12. 12

    If the radius of a circle is increased by 10%, by what percentage does its area increase?

    hard

    Area factor = 1.1² = 1.21. Final answer: 21%.

  13. 13

    A rectangular field has a diagonal of 13 m and one side of 5 m. Find the other side and the area.

    hard

    Other side = sqrt(169 - 25) = 12. Area = 5 × 12 = 60. Final answer: 12 m and 60 m².

  14. 14

    Find the area of an equilateral triangle of side 10 cm. Also find the volume in litres of a tank 10 m long, 6 m wide and 3 m deep.

    hard

    Triangle area = (sqrt(3)/4) × 100 = 25 sqrt(3) = about 43.3 cm². Tank volume = 10 × 6 × 3 = 180 m³ = 180,000 litres. Final answer: 25 sqrt(3) cm² and 180,000 litres.

Frequently asked questions

Which value of pi should I use?

Use 22/7 when the radius or diameter is a multiple of 7. Otherwise use 3.14 unless the question gives a value.

How do I handle melted and recast solids?

The volume of the old solid equals the volume of the new one, so equate the volume formulas.

How do changes in length affect area and volume?

If every length scales by k, area scales by k² and volume by k³.

What should I practise next?

Percentages for change in area problems and pipes and cisterns for tank volumes. The TCS interview guide covers the later rounds.

Related guides

More in Aptitude Questions for Placements

See all in this section